Author Topic: 2001 Max II 800T Body/Axle questions  (Read 645 times)

Offline wedge

  • Trade Count: (2)
  • Master 6x6'er
  • *****
  • Posts: 1426
  • Country: us
  • Karma: +0/-0
  • Run it like a Big Block !
Re: 2001 Max II 800T Body/Axle questions
« Reply #10 on: April 17, 2018, 03:48:26 PM »
Cracks

1 way to stop a crack is to stop drill it, use a 1/8th  drill bit or slightly wider if crack is wide and drill a hole at both ends of the  crack, this will help relieve the stress.
iagree
3= Amphicat. 1= StarCraft. 1= Max 2= Attex  And Counting

Offline garretttpe

  • Trade Count: (0)
  • Full 6x6'er
  • ***
  • Posts: 246
  • Country: us
  • Karma: +0/-0
Re: 2001 Max II 800T Body/Axle questions
« Reply #9 on: April 17, 2018, 05:46:02 AM »
Cracks

1 way to stop a crack is to stop drill it, use a 1/8th  drill bit or slightly wider if crack is wide and drill a hole at both ends of the  crack, this will help relieve the stress.

Offline Delduck

  • Trade Count: (0)
  • Sr. 6x6'er
  • ****
  • Posts: 259
  • Country: us
  • Karma: +0/-0
Re: 2001 Max II 800T Body/Axle questions
« Reply #8 on: April 16, 2018, 10:09:04 PM »
Congrats on the 2/2s I have a 4 and 2 and a lot of fun with them. Definitely post pics

Offline JonathanF101185

  • Trade Count: (0)
  • Full 6x6'er
  • ***
  • Posts: 123
  • Country: us
  • Karma: +0/-0
  • Jonathan's South Texas 6x6
Re: 2001 Max II 800T Body/Axle questions
« Reply #7 on: April 16, 2018, 09:45:39 PM »
I can get detailed pics when I purchase it Duck. I pick it up May 17th! Woohoo! That will make 2 Max II for me. And still going  banana I want a Max iv next for sure.

Offline Delduck

  • Trade Count: (0)
  • Sr. 6x6'er
  • ****
  • Posts: 259
  • Country: us
  • Karma: +0/-0
Re: 2001 Max II 800T Body/Axle questions
« Reply #6 on: April 16, 2018, 09:06:01 PM »
And yes thy did add them to my max 4.  Just didnít know about thy 2 but looks like thy do for thy 2  hilarious

Offline wedge

  • Trade Count: (2)
  • Master 6x6'er
  • *****
  • Posts: 1426
  • Country: us
  • Karma: +0/-0
  • Run it like a Big Block !
Re: 2001 Max II 800T Body/Axle questions
« Reply #5 on: April 16, 2018, 07:42:30 PM »
To answer that Yes thy did and Yes there Original braces . Those are just like the ones I told you duck you needed to add to your Max 4.
3= Amphicat. 1= StarCraft. 1= Max 2= Attex  And Counting

Offline Delduck

  • Trade Count: (0)
  • Sr. 6x6'er
  • ****
  • Posts: 259
  • Country: us
  • Karma: +0/-0
Re: 2001 Max II 800T Body/Axle questions
« Reply #4 on: April 16, 2018, 07:14:30 PM »
Hey Jersey did the max 2 come with rubber tracks like the 4?   Iím looking for them and havenít herd a positive YES yet, but that track bracket looks like the originals not aftermarket. Thanks for the pic Jonathan

Offline Jerseybigfoot

  • Trade Count: (0)
  • 6x6'er
  • **
  • Posts: 35
  • Karma: +0/-0
Re: 2001 Max II 800T Body/Axle questions
« Reply #3 on: April 16, 2018, 05:53:19 PM »
yes . Tracks Bracket
plastic weld not epoxy, larger washer
check connection at battery and relay set

Offline JonathanF101185

  • Trade Count: (0)
  • Full 6x6'er
  • ***
  • Posts: 123
  • Country: us
  • Karma: +0/-0
  • Jonathan's South Texas 6x6
Re: 2001 Max II 800T Body/Axle questions
« Reply #2 on: April 16, 2018, 04:57:52 PM »
Here are the pics

Offline JonathanF101185

  • Trade Count: (0)
  • Full 6x6'er
  • ***
  • Posts: 123
  • Country: us
  • Karma: +0/-0
  • Jonathan's South Texas 6x6
2001 Max II 800T Body/Axle questions
« Reply #1 on: April 16, 2018, 04:46:47 PM »
Well here is the Max II I am looking into adding to my collection. Itís a 2001 800T with a 20hp Kohler. I noticed In the picture there seems to be a bracket along the bottom of the tub, maybe to support tracks better?  Has anyone seen this type of bracket on a six wheeler? I know itís hard to see but you can also see that it sticks out from the tub extending the mount for the axle it seems. I asked for better pics but I donít have those as of yet.

Also if you notice in the from pic, some of the screws from the gas tank have started to crack the plastic. What can be done about that? Do yíall just use polyurethane epoxy to seal the crack and stop the spreading?

Also the winch doesnít work for whatever reason. If anyoneís bought one with a winch that didnít work and it was a simple fix, by all means fill me in on your experience.

Will attach photos once Iím home. My iPhone wonít allow me to.  nopics