6x6Talk Forum
General Category => SPRINGER: Talk pertaining to custom ATV's => Topic started by: WFO on September 16, 2017, 08:38:22 PM
-
BIG BLOCK MAX IV ENGINE MOUNTS. so i had this issue with the drive belt making noise and i was loosing grip on the belt when pulling hills. so after taking a vid of what was going on i found that the engine was pulling down and the engine twisting when under heavy torque loads. so after watching the vid a few times and looking at other types of mounts i came up with this. theirs not much room to work with so i had no choice but to double up the mounts and do some welding. could not go any larger in diam.
-
Those are the same things that the engine was mounted in the cat. Or same kind as thy was way to soft !
If you still have problems you can go with bolts and Poly bushing's . That is how the StarCraft engine will mount .
-
no more problems, thats been 5 years ago banana
-
Got ya ! I Never did like the way thy put the engine on top of the tranny in the 4 !
-
it seems like it flys better when launched banana
-
Oh I have seen your Launched Pics ;)