GOLIATH is at 2.75 I like it TAUT
That is a LOT of stick movement !!I am just around Whippers spec's But Whipper says he is taking it at the Throttle cable and NOT the top of the stick . Am I rite on this whip ?If so that will make a Big difference in the two #'s
WhipperI have about 11 inches total from full forward to full reverse i think, never really measured it.
Quote from: Phelpsy69er on March 20, 2018, 10:04:41 AMI take it the original popsicle stick trans cases had a little bit more metal in the casting to make where they mount.The channel case casting is narrower correct?Yes, but you can make up the difference with some washers or custom made spacers.It is better that they have a pivot point rather then rock against the case.
I take it the original popsicle stick trans cases had a little bit more metal in the casting to make where they mount.The channel case casting is narrower correct?
WhipperAs always your observation is awesome, I prob dont have a issue do to the rod end bearings. When I change them out I will put them like your picture. I do have more play than wanted with the rod bearings.