6x6Talk Forum

6x6 Technical Questions => Technical questions about amphibious ATV's => Topic started by: dexter2011 on September 20, 2018, 08:15:24 PM

Title: Clutch Removal
Post by: dexter2011 on September 20, 2018, 08:15:24 PM

Does anyone have any idea on how to pull this clutch off? It doesn't have a threaded hole.

Title: Re: Clutch Removal
Post by: WFO on September 20, 2018, 10:52:43 PM

then thread it, find a tap that will work , modify a slide hammer and pull it off.

Title: Re: Clutch Removal
Post by: garretttpe on September 21, 2018, 08:28:47 AM

and dont forget the KROIL, Mouse Milk, or any other bolt loosener you prefer, even break fluid works great

Title: Re: Clutch Removal
Post by: wedge on September 21, 2018, 09:50:49 AM

Take the outer bell off. There may be a place for a Puller to thread in or on to. My be LEFT Hand Thread also !

Title: Re: Clutch Removal
Post by: Phelpsy69er on September 21, 2018, 09:53:48 AM

There is! take that big hex off and a steerig wheel puller rod will thread into it, I had to cut like a 3/8 or 5/16 rod to bottom in crankshaft hole and go up inside the puller bolt to make sure I did'nt booger any threads up! worked great

Title: Re: Clutch Removal
Post by: wedge on September 21, 2018, 09:59:36 AM

 iagree
There ya go  whistling

Title: Re: Clutch Removal
Post by: dexter2011 on September 22, 2018, 04:25:40 PM

Got it off guys, thanks.

Title: Re: Clutch Removal
Post by: wedge on September 23, 2018, 10:19:16 AM

 tp banana banana