It appears that you have not registered with 6x6Talk Forum. To register, please click here...
6x6 Technical Questions > Electrical
Fuel selinoid
wedge:
Your More than welcome my friend !! ;)
Delduck:
Again wedge thank you for sharing your knowledge.
wedge:
Ok here is the deal. The fuel shut off Selinoid ( I think that's the wrong spelling but ?) Shuts the engine down when it loses oil pressure AND when the key is off it closes the Main jet off.
I have found them not to be Vibration friendly and pron to failure !
I ALWAY put an inling fuel shut off valve in all my machines !!!
If you feel ok with the oil pressure and so on you can pull the unit out and SNIP the Rubber Tip off of it.
But it is your call as you own the machine.
If you feel it is a good part find the White wire First and power it up to see if it Clicks open If not it is no good anyway !
It will be located in the Bottom of your carb in the center of the fuel bowl. OR in the side of a bigger carb. You cant miss it !
It is the only thing on the carb with a wire going to it.
Delduck:
Wedge would you recommend me to do the same, and if so teach me. If not I'll try argo 8x8's idea and find the white wire. Do you need the fuel selinoid to work for the machine to run or is it one of those EPA things they need to put on.
wedge:
I have had Bad luck with those fuel selinoids ! I end up taking a Cutter to the tip so thy don't work !
Navigation
[0] Message Index
[#] Next page
Go to full version