Author Topic: Strykers or Duro's???  (Read 170 times)

Offline Craig_B

  • Trade Count: (0)
  • 6x6'er
  • **
  • Posts: 50
  • Country: ca
  • Karma: +0/-0
  • 1983 Argo TB 8X8 and a 1963 Pengor Penguin
Re: Strykers or Duro's???
« Reply #7 on: May 28, 2018, 09:28:35 AM »
My bank account decided on purchasing the Duro HF243's.
Very happy with them and had the machine out on the lake this weekend to try them out.
Only purchased 4 of the Duro's which I mounted on the front and rear axles, the other 4 on the two center axles are the old beat to death Runamucks.


https://youtu.be/no3BToq_aI4?t=7s
« Last Edit: May 28, 2018, 09:48:00 AM by Craig_B »

Offline snaps10

  • Trade Count: (0)
  • 6x6'er
  • **
  • Posts: 25
  • Karma: +0/-0
Re: Strykers or Duro's???
« Reply #6 on: May 09, 2018, 02:40:15 PM »
Iím running the Duros and like them so far. Havenít had them in water deep enough to float yet, but thatís a VERY small percentage of what Iíll use it for. Tried running forward and backward and couldnít tell enough difference to put them back on forward. 2.5psi seems to be the sweet spot for me. 1PSI didnít like skidding at all, 3.5 was a noticeably harsher ride so Iíve kept them at 2.5.

I was planning on trimming off a bunch of the nubs for better skid, but after finding good pressure havenít felt the need enough to take the time to cut them. 

Offline Craig_B

  • Trade Count: (0)
  • 6x6'er
  • **
  • Posts: 50
  • Country: ca
  • Karma: +0/-0
  • 1983 Argo TB 8X8 and a 1963 Pengor Penguin
Re: Strykers or Duro's???
« Reply #5 on: April 30, 2018, 05:48:58 PM »
I use them with my tracks, got them from Richard Relics, perhaps have them ship to a USA address and you pick them up, if you are close enough

Jeff Bar

Good to hear.
Thanks

Offline Argo8x8

  • Trade Count: (0)
  • 6x6'er
  • **
  • Posts: 46
  • Karma: +0/-0
Re: Strykers or Duro's???
« Reply #4 on: April 30, 2018, 05:44:27 PM »
I use them with my tracks, got them from Richard Relics, perhaps have them ship to a USA address and you pick them up, if you are close enough

Jeff Bar

Offline Craig_B

  • Trade Count: (0)
  • 6x6'er
  • **
  • Posts: 50
  • Country: ca
  • Karma: +0/-0
  • 1983 Argo TB 8X8 and a 1963 Pengor Penguin
Re: Strykers or Duro's???
« Reply #3 on: April 30, 2018, 04:14:27 PM »
Sorry to say, but I really like my 21: AT101's on my ARGO Response, you can get them priced between the 2 you listed. 
I never liked the 4x4 pattern of the Strykers, but I do not know about the Duro

Jeff Bar
I would prefer those too.
Do you know if they will work with the Argo plastic tracks?

Anyone know of a supplier up here in Canada??

Thanks
« Last Edit: April 30, 2018, 05:59:16 PM by Craig_B »

Offline Argo8x8

  • Trade Count: (0)
  • 6x6'er
  • **
  • Posts: 46
  • Karma: +0/-0
Re: Strykers or Duro's???
« Reply #2 on: April 30, 2018, 01:25:00 PM »
Sorry to say, but I really like my 21: AT101's on my ARGO Response, you can get them priced between the 2 you listed. 
I never liked the 4x4 pattern of the Strykers, but I do not know about the Duro

Jeff Bar

Offline Craig_B

  • Trade Count: (0)
  • 6x6'er
  • **
  • Posts: 50
  • Country: ca
  • Karma: +0/-0
  • 1983 Argo TB 8X8 and a 1963 Pengor Penguin
Strykers or Duro's???
« Reply #1 on: April 30, 2018, 09:44:46 AM »
Ready to pull the trigger on 4-8 new tires for my Argo.  22X11X8
I wish I could afford the proper runamuks or whatever their new incarnation is but.....

So I have narrowed it down to one of these two tires.
I can get the Strykers for $99.00  or the Duro's for $67.00 Canadian dollars.

In your opinion which is the better purchase?

Thanks