Author Topic: Oil Temp sensor  (Read 474 times)

Offline Jerseybigfoot

  • Trade Count: (0)
  • 6x6'er
  • **
  • Posts: 33
  • Karma: +0/-0
Re: Oil Temp sensor
« Reply #8 on: September 07, 2018, 10:39:24 AM »
In the spare drain plug on my Briggs v twin

Offline wedge

  • Trade Count: (2)
  • Master 6x6'er
  • *****
  • Posts: 1412
  • Country: us
  • Karma: +0/-0
  • Run it like a Big Block !
Re: Oil Temp sensor
« Reply #7 on: September 05, 2018, 02:28:25 PM »
Right above the mounting flange and drain plug ? That's where I would say it should be  twoCents
3= Amphicat. 1= StarCraft. 1= Max 2= Attex  And Counting

Offline Craig_B

  • Trade Count: (0)
  • 6x6'er
  • **
  • Posts: 66
  • Country: ca
  • Karma: +0/-0
  • 1983 Argo TB 8X8 and a 1963 Pengor Penguin
Re: Oil Temp sensor
« Reply #6 on: September 05, 2018, 11:23:06 AM »
In case anyone else ever needs the location of the oil temp sensor on a Tech motor it was located below the starter motor on the front side of the engine.

Offline Craig_B

  • Trade Count: (0)
  • 6x6'er
  • **
  • Posts: 66
  • Country: ca
  • Karma: +0/-0
  • 1983 Argo TB 8X8 and a 1963 Pengor Penguin
Re: Oil Temp sensor
« Reply #5 on: August 30, 2018, 09:13:28 AM »
It should be on the Front or Rear side of the Block. On the Flat surface. About 1 to 2 inches above the drain plug.

Awesome.

Thanks  I will have a look this weekend.

Offline wedge

  • Trade Count: (2)
  • Master 6x6'er
  • *****
  • Posts: 1412
  • Country: us
  • Karma: +0/-0
  • Run it like a Big Block !
Re: Oil Temp sensor
« Reply #4 on: August 29, 2018, 04:39:56 PM »
It should be on the Front or Rear side of the Block. On the Flat surface. About 1 to 2 inches above the drain plug.
3= Amphicat. 1= StarCraft. 1= Max 2= Attex  And Counting

Offline Craig_B

  • Trade Count: (0)
  • 6x6'er
  • **
  • Posts: 66
  • Country: ca
  • Karma: +0/-0
  • 1983 Argo TB 8X8 and a 1963 Pengor Penguin
Re: Oil Temp sensor
« Reply #3 on: August 29, 2018, 10:39:42 AM »
I had an old ARGO THD, I think the sender was on the block

Jeff BAr

Any idea where on the block it was located?

Thanks

Offline Argo8x8

  • Trade Count: (0)
  • 6x6'er
  • **
  • Posts: 62
  • Karma: +0/-0
Re: Oil Temp sensor
« Reply #2 on: August 28, 2018, 06:44:28 PM »
I had an old ARGO THD, I think the sender was on the block

Jeff BAr

Offline Craig_B

  • Trade Count: (0)
  • 6x6'er
  • **
  • Posts: 66
  • Country: ca
  • Karma: +0/-0
  • 1983 Argo TB 8X8 and a 1963 Pengor Penguin
Oil Temp sensor
« Reply #1 on: August 28, 2018, 04:33:03 PM »
I have an old Argo TB 8X8 with the Tech. engine.
The oil temperature gauge has just stopped working.
I was hoping someone would know the temp sensors location on the engine so I can follow the wires back to the gauge. Following the wires from the gauge down isnt working.

Thanks